3 BHK
Door Design for a 3 BHK
In a 3 bhk of 1,100-1,500 sq ft, the door typically works to Double 1,500×2,400mm. Doors set the quality of a house before anyone touches a finish. Ironmongery and reveal detail are where the money shows.
Photo: emdot · BY 2.0At Double 1,500×2,400mm
Door designs that fit a 3 bhk
Photo: Paul Keller · BY 2.0Chalk Minimal Flush, floor-to-ceiling Door Design
Nothing decorative survives unless it also does work. Long uninterrupted planes, shadow-gap joints, one quiet grain.
- Layout
- Flush, floor-to-ceiling
- Style
- Serene Minimal
- Palette
- Chalk · Pale Oak · Linen
- Leaf
- Flush ply, chalk laminate
- Frame
- Concealed frame, no architrave
- Hardware
- Flush pull, push-to-open
- Action
- Standard hinged, 2,400mm leaf
- Room dimension
- Double 1,500×2,400mm
Storage features
- Concealed frame set flush with the plaster
- No architrave to collect dust
- A flush floor threshold
Special features
- A floor-to-ceiling flush leaf that reads as wall
- A concealed frame with no architrave
- Push-to-open, no visible hardware
Ideal forHomes wanting doors to disappear into the wall
Photo: oskay · BY 2.0Charcoal Bold Dark pivot with a black frame Door Design
High contrast, confident mass, a single saturated move per room. Dark joinery held against light stone.
- Layout
- Dark pivot with a black frame
- Style
- Bold Contemporary
- Palette
- Charcoal · Oxblood · Smoked Oak
- Leaf
- Solid-core pivot, charcoal veneer
- Frame
- Black powder-coated steel
- Hardware
- Black lever on a rose
- Action
- Floor-pivot, 1,100mm wide
- Room dimension
- Double 1,500×2,400mm
Storage features
- A pivot door that needs no side frame
- A concealed floor spring
- A black reveal at the head
Special features
- A wide pivot door turning on a floor spring
- A black steel frame as a graphic line
- Charcoal veneer against pale plaster
Ideal forApartments wanting a dramatic entrance or study door
Photo: emdot · BY 2.0Teak Heritage Carved teak with brass Door Design
Indian craft detailing on a contemporary frame — jaali, cane, inlay and hand-finished brass, used sparingly.
- Layout
- Carved teak with brass
- Style
- Modern Heritage
- Palette
- Teak · Cane · Antique Brass
- Leaf
- Solid teak, hand-carved
- Frame
- Teak frame with a carved head
- Hardware
- Antique brass handle with a rose
- Action
- Hinged with a traditional latch
- Room dimension
- Double 1,500×2,400mm
Storage features
- A carved teak head panel above the leaf
- Brass hinges and a traditional latch
- A teak threshold
Special features
- A hand-carved teak leaf with a decorated head
- Unlacquered brass that patinas
- Craft at the threshold of every room
Ideal forCraft-led homes wanting timber at every threshold
Sizing
How this changes with home size
| Home size | Door dimension |
|---|---|
| 1 BHK | Standard 900×2,100mm |
| 2 BHK | Full-height 900×2,400mm |
| 3 BHK | Double 1,500×2,400mm |
| 4 BHK | Pivot 1,100×2,700mm |
| 4+ BHK / Villa | Bespoke to the opening |
Also in a 3 bhk
Other rooms at this configuration
Planning note
Door at 3 bhk scale
At 1,100-1,500 sq ft, the constraint on a door is usually circulation rather than storage — there is enough wall to plan the volume in, but not enough floor to plan around a mistake. Double 1,500×2,400mm is the dimension we hold to because it is the largest the room comfortably allows, not the largest that would fit on paper.
Households at this configuration consistently under-plan storage volume for a door, then add freestanding furniture later that the original layout never accounted for.
A door reads best when its frame is either flush with the wall plane or expressed deliberately. The half-hearted 12mm architrave is what makes joinery look builder-grade.
Floor clearance should be set for the finished floor plus any rug. Doors planed on site after flooring never look right at the bottom edge.
Pivot doors need a structural head and a level floor. Both are civil decisions taken long before the door is ordered.
Where a door leads to a bathroom, undercut it for return air or the exhaust fan will not move anything.
Decide the swing direction with the furniture layout in hand. A door that opens against a switchboard or a bed is a permanent irritation.
What moves the estimate at this size
- Leaf construction and species of the face.
- Glazing specification — double glazing and low-E coatings are the biggest single variable.
- Hardware, which on a pivot or a sliding system can exceed the leaf cost.
- Frame material and whether a sub-frame is used.
- Site measurement and any civil correction to the opening.
Questions
Door questions
What is a good internal door height?
2,100mm is standard, but 2,400mm — or full slab height — makes a dramatic difference to how tall a room reads, and it costs surprisingly little more.
Are pivot doors practical?
For a wide entrance or study door, yes. They need a good floor spring and a level threshold, and they do not seal as well as a hinged door, so they are a poor choice for a bedroom or a bathroom.
Solid-core or hollow-core doors?
Solid-core everywhere you want acoustic separation — bedrooms, bathrooms, study. Hollow-core is acceptable only for utility and storage doors.
Should door frames be concealed?
A concealed frame gives the cleanest result but must be installed before plastering and costs considerably more. A slim square-edge frame is the practical compromise.
Next step
Planning a 3 bhk?
Send the builder's floor plan. We come back with a layout view and a line-by-line estimate.