Lighting
Decorative Lighting
What good decorative lighting looks like in specification rather than in photographs, drawn six ways across our house styles.
Overview
Decorative Lighting, in plain specification
Written for the decision, not for the mood board.
A good decorative lighting is invisible in use — everything within reach, nothing in the way, no door fouling another. Achieving that is a matter of dimensions and hardware rather than of style, which is why the specification table below matters more than the photographs.
Decorative Lighting is engineered before it is styled. The layout, the services behind it, the hardware carrying it and the clearances around it all get resolved on a drawing long before a finish is picked. Done in that order, the finish becomes a free choice. Done in reverse, the finish becomes a compromise.
Where decorative lighting interacts with services — a duct, a drain, a conduit, an AC route — the service wins. Every attractive detail that ignored a service has been rebuilt at some point, usually at the client’s cost, which is why we resolve them together on one drawing.
Within decorative lighting specifically, one thing changes the decision: the decorative grade is a specification, not a description — we write down what it means in dimensions and finish before it is priced.
Six house styles
Decorative Lighting in six personalities
The same brief resolved six ways. Each carries its own material, finish and detailing.
Minimal Decorative Lighting
Serene Minimal treats decorative lighting as chalk · pale oak · linen: nothing decorative survives unless it also does work. CRI: Ra 90. Beam angle: 36 degrees. Driver: Dimmable, external.
See this style
Bold Decorative Lighting
Bold Contemporary treats decorative lighting as charcoal · oxblood · smoked oak: high contrast, confident mass, a single saturated move per room. CRI: Ra 95. Beam angle: 24 degrees, adjustable. Driver: DALI dimmable.
See this styleHeritage Decorative Lighting
Modern Heritage treats decorative lighting as teak · cane · antique brass: indian craft detailing on a contemporary frame — jaali, cane, inlay and hand-finished brass, used sparingly. CRI: Ra 90. Beam angle: 38 degrees. Driver: Dimmable.
See this style
Photo: Foto Miki Digital · PDM 1.0Classic Decorative Lighting
Classic Luxe treats decorative lighting as ivory · statuario · gold: proportioned panelling, cornice and moulding, book-matched stone and warm gilt detail on ivory. CRI: Ra 95. Beam angle: 24 degrees. Driver: Phase-cut dimmable.
See this style
Photo: flossyflotsam · BY 2.0Scandi Decorative Lighting
Indo-Scandinavian treats decorative lighting as birch · chalk · sage: pale timber, soft daylight and muted green — nordic restraint adapted for indian light, dust and humidity. CRI: Ra 90. Beam angle: 36 degrees. Driver: Dimmable.
See this style
Photo: footloosiety · BY 2.0Deco Decorative Lighting
Art Deco Glam treats decorative lighting as emerald · brass · lacquer: fluting, fans and geometry. CRI: Ra 95. Beam angle: 15 degrees accent. Driver: DALI with scene control.
See this styleSpecification
Decorative Lighting specification, style by style
This is the table we issue to the factory and the site. It is also what a warranty is enforced against, which is why it reads in grades and dimensions.
| Specification | Minimal | Bold | Heritage | Classic | Scandi | Deco |
|---|---|---|---|---|---|---|
| Colour temperature | 3000K | 2700K | 2700K warm | 2700K | 3000K | 2700K |
| CRI | Ra 90 | Ra 95 | Ra 90 | Ra 95 | Ra 90 | Ra 95 |
| Beam angle | 36 degrees | 24 degrees, adjustable | 38 degrees | 24 degrees | 36 degrees | 15 degrees accent |
| Driver | Dimmable, external | DALI dimmable | Dimmable | Phase-cut dimmable | Dimmable | DALI with scene control |
| Mounting | Recessed, spring clip | Magnetic track | Surface, timber base | Recessed with trimless plaster-in | Recessed | Trimless plaster-in |
| Glare control | Deep recessed, black baffle | Honeycomb louvre | Shaded | Deep baffle | Black baffle | Honeycomb louvre |
| Lumen output | 600 lm per fitting | 800 lm per fitting | 500 lm | 700 lm | 600 lm | 450 lm accent |
| Control | Wall dimmer | App and scene control | Wall dimmer | Scene keypad | Wall dimmer | Scene keypad with astro timer |
Before you commit
How to choose decorative lighting
Six checks that prevent the failures we are most often called to fix.
- Design light in layers: ambient, task, accent and decorative. A room with only one layer never feels right regardless of how much light is in it.
- Fix the colour temperature across the whole home and do not vary it room to room. 2700K to 3000K reads as warm and residential; 4000K reads as an office.
- Ask for CRI 90 or better anywhere colour matters — wardrobes, kitchens, bathrooms and anywhere art hangs.
- Dim everything that can be dimmed, and confirm driver and dimmer compatibility in writing. Flicker at low levels is a compatibility failure, not a fixture fault.
- Aim accent fittings at objects — art, texture, joinery. A grid of downlights lighting the floor is the most common mistake in Indian homes.
- Check glare from a seated position, not standing. The bare LED you cannot see at 1.7m is the one that stares at you from the sofa.
Bangalore
Decorative Lighting in Bangalore
What the city's climate, water, housing stock and society rules mean for this specification.
Bangalore is an unusually easy city to build interiors in and an unusually easy one to get wrong for a single reason: water. Borewell supply across the eastern and northern corridors is hard, and that hardness decides how decorative lighting looks after two years far more than the material grade does.
Most societies here allow work between roughly 9am and 6pm, restrict Sundays, require a service-lift booking and hold a debris deposit. That schedule is written into the programme at the start, because a plan that assumes twelve working hours a day will slip in its first week.
Traffic decides delivery windows more than distance does. Material moving to Whitefield, Sarjapur or Electronic City is scheduled outside peak hours, and large items are checked against the lift and stair turn before the order rather than on delivery day.
Dust along the metro and ORR construction corridors is a real specification input. Sealed joinery, washable finishes and casement or sliding windows with good seals pay for themselves in these pockets in the first year.
Our Bangalore projects run with a named project manager and a written weekly site report, which is what keeps a fit-out on programme in a city with restricted working hours.
Sizing
Decorative Lighting by home size
Sizing below is what we plan decorative lighting to in each home size. These are working dimensions from completed projects, not catalogue minimums.
| Home size | Typical scope | Planning note |
|---|---|---|
| 1 BHK | Compact, single run | Compact planning, one clear gesture |
| 2 BHK | Standard, two runs | Standard scope, most common brief |
| 3 BHK | Full specification | Full scope with storage planned in litres |
| 4 BHK | Extended with island or dresser | Extended scope, bespoke elements |
| 4+ BHK / Villa | Bespoke, villa scale | Villa scale, bespoke throughout |
Cost
What moves the price of decorative lighting
We quote line by line rather than per square foot, because these are the items that actually differ between two estimates.
- Fixture quality: optics, glare control and driver, which are what separate two fittings with identical lumen figures.
- Trimless and plaster-in fittings, which cost more in installation than in hardware.
- Control system: a wall dimmer, a scene keypad and a full DALI system are three different budgets.
- Quantity, which is driven by beam angle and ceiling height.
- Decorative fittings, which are priced as objects rather than as light sources.
Process
How the work runs
Five stages, with the decisions each one locks.
We measure the space ourselves rather than working from the builder's drawing, note the services, water quality, daylight and society rules, and write down how the room is actually used. Decorative Lighting is specified against that survey, not against a catalogue.
Plans, elevations and details, with the specification written as grades and dimensions. You approve an elevation, not a render — this is the stage where changes cost nothing.
Material, finish, hardware and services are locked, and the estimate becomes a line-by-line document. We tell you exactly what this date locks and what can still change afterwards.
Factory production runs to the approved drawing while site work is prepared. Material is checked against the approved sample on arrival, in daylight, and stored correctly until the programme calls for it.
Installation, testing, snagging and a documentation file with drawings, warranties, decor codes and hardware models. A first-year service visit is scheduled at handover.
Living with it
Maintaining decorative lighting
The honest routine, and the mistakes that cost the most to undo.
Care and maintenance
- Wipe lenses and reflectors twice a year. Dust on a lens costs more light than a failing LED does.
- Record the driver and lamp specification at handover so a failed fitting can be matched years later.
- Check for flicker after any dimmer change — it usually indicates a mismatched load.
- Expect drivers, not LEDs, to be the component that fails. Keep two spares of anything used at scale.
What goes wrong
- Lighting the ceiling plan rather than the furniture plan.
- Mixing colour temperatures within a sightline.
- Using non-dimmable fittings to save cost, then discovering the room only has one mood.
- Placing downlights directly above where people sit, which lights the tops of heads and nothing else.
Detailing
Decorative Lighting detailing notes
The small decisions that separate built work from assembled work.
Cove and profile light should wash a surface, not be visible as a strip. If you can see the diode line, the reveal is too shallow.
Pendants over a dining table hang 750–850mm above the table top. Higher and they light the room; lower and they block conversation.
In a bedroom, put the reading light on the wall or the headboard, and put a dimmed low-level circuit on the floor for night use.
Keep the switching logic simple enough to explain in one sentence per room. Complex scene systems get abandoned within a year otherwise.
Questions
Decorative Lighting — answered
What colour temperature suits an Indian home?
2700K to 3000K throughout. Cooler light reads as commercial in a residence, and mixing temperatures within one sightline is the fastest way to make good fittings look cheap.
How many downlights does a room need?
Fewer than most plans show. Light what needs lighting — the counter, the art, the seat, the path — and let the rest of the room fall away. A 12×14 living room usually needs six to eight well-aimed fittings, not sixteen.
Can Decorative Lighting be dimmed?
Yes when the driver and dimmer are matched. We specify both together and test at commissioning, because flicker at low output is almost always a compatibility issue.
What is CRI and does it matter?
Colour rendering index describes how truthfully a light shows colour. Below Ra 80 skin tones and fabrics look wrong; Ra 90 or better is the standard for living areas, wardrobes and bathrooms.
How long do LED fittings last?
The diodes outlast the drivers. Expect 30,000 to 50,000 hours from a good fitting, with the driver as the practical service item.
Should lighting be planned before or after the ceiling?
Before. The ceiling is built around the lighting layout, not the other way round, and moving a recessed fitting afterwards means cutting and making good.
Do you work on decorative lighting projects across Bangalore?
Yes — Bangalore is where most of our projects are, from apartments along Sarjapur Road, Whitefield and Hebbal to independent homes in Jayanagar, Indiranagar and Malleshwaram. We survey the space ourselves, work within the society's access and working-hour rules, and hand over with a documentation file. There is a dedicated page for our work in the city if you want the full picture.
Does Bangalore's climate or water affect this choice?
The climate helps and the water does not. Mild year-round temperatures are kinder to timber and joinery than almost any other Indian city, so craft detailing lasts. Hard borewell water in the eastern and northern corridors is the real constraint — it scales glass, chrome and stone, and it changes what we specify and what maintenance we ask the family to commit to.
Explore more
More in Lighting
Related pages
Next step
Planning decorative lighting for your home?
Send your floor plan and we come back with a layout, a material direction and a line-by-line estimate. Free survey across Bangalore.