Flooring · Art Deco Glam
Emerald Deco Herringbone with a brass inlay Flooring Design
Fluting, fans and geometry. Lacquered colour, brass inlay lines and mirror used as architecture. Flooring is the one finish you cannot change without emptying the house. We choose it for how the room is used, then let everything else respond to it.
Photo: TANAKA Juuyoh (田中十洋) · BY 2.0Specification
Flooring design details
| Detail | Specification |
|---|---|
| Layout | Herringbone with a brass inlay |
| Style | Art Deco Glam |
| Palette | Emerald · Brass · Lacquer |
| Material | Herringbone engineered timber |
| Finish | Satin lacquer with a brass strip |
| Joint | Herringbone with a brass divider |
| Underlay | Ply subfloor, screwed |
| Home size | Room dimension |
|---|---|
| 1 BHK | Single material throughout |
| 2 BHK | Timber in bedrooms, tile elsewhere |
| 3 BHK | Stone in living, timber in bedrooms |
| 4 BHK | Marble in formal areas |
| 4+ BHK / Villa | Zoned by function |
Storage features
- A brass inlay dividing the herringbone field
- A geometric border at the room edge
- A polished threshold strip
Special features
- Herringbone laid at 45 degrees to the room
- A brass divider between zones
- A geometric border at the perimeter
Ideal forStatement living and dining rooms
Compare
The same flooring in the other five styles
One brief, six resolutions. Each carries its own layout, material specification and storage strategy.
Photo: shalommama · BY 2.0Minimal Large-format porcelain Flooring
Chalk · Pale Oak · Linen
See this design
Photo: tommerton2010 · BY 2.0Bold Dark engineered oak Flooring
Charcoal · Oxblood · Smoked Oak
See this design
Photo: Plutor · BY 2.0Heritage Terracotta stone with a border Flooring
Teak · Cane · Antique Brass
See this design
Photo: tommerton2010 · BY 2.0Classic Book-matched marble Flooring
Ivory · Statuario · Gold
See this design
Photo: DyosEL · BY 2.0Scandi Pale timber laminate Flooring
Birch · Chalk · Sage
See this designDetail
Specifying and living with this flooring
Fluting, fans and geometry. Lacquered colour, brass inlay lines and mirror used as architecture. That governs every material decision on this page — the layout and the storage strategy come first, and flooring is where the art deco glam palette gets applied to a plan that already works.
A specification is only as good as what happens after handover. flooring in this style is chosen as much for how it ages as for how it photographs on day one — the joinery finish, the hardware grade and the way an edge is sealed all show up in year three, long after the render is forgotten.
Art Deco Glam is a coherent palette rather than a fixed rule, and most finished homes borrow across two styles rather than committing to one throughout. What rarely works is switching the palette room to room within one sightline — the transition needs a threshold, a change of material, or a corridor to read as intentional rather than accidental.
The specification below is what we issue to the factory and the site for this exact style and layout. It is also what a warranty is enforced against, which is why it is written as grades and dimensions rather than as adjectives.
Nothing on this page is a fixed catalogue item. The layout, the palette and every material line are redrawn against your own room dimensions before anything is priced — what you see here is the starting specification, not the finished drawing.
Art Deco Glam suits a household that already knows roughly what it wants a flooring to feel like, rather than one still deciding between opposites — the palette is distinctive enough that it rewards commitment and looks unresolved applied half-heartedly.
This reads best in a home where at least the adjoining rooms share the same direction, even if not the same materials. Art Deco Glam carried into one room and abandoned at the next doorway tends to make both rooms look like an afterthought rather than a choice.
If you are drawn to art deco glam but unsure it will hold up to daily use, that is worth raising directly at the survey — the palette can usually be adapted toward more forgiving materials without losing the character that made it appealing in the first place.
Worth checking before sign-off
- Measure the subfloor before choosing anything. A screed out of level by more than 3mm over 2m has to be corrected first, and that cost belongs in the flooring budget.
- Ask for the wear layer in millimetres, not the marketing grade. That number decides whether the floor can ever be sanded back.
- Check moisture in the slab. New concrete needs weeks of drying; laying over a damp slab is the most common cause of cupping in the first monsoon.
- Match the format to the room size. A 1900mm wide plank in a 3m bedroom leaves awkward rips at both walls; the plank should be sized to the room, not the catalogue.
- See a laid sample of at least a square metre. Grain and gloss read completely differently at one plank versus a floor.
- Confirm the expansion gap and how it will be covered before the skirting is ordered.
Living with it
- Felt pads under every chair and table leg, replaced yearly. Grit trapped under a pad is what actually scratches a floor.
- Damp-mop, never wet-mop. Standing water at a joint swells the core, and no finish prevents that.
- Keep indoor humidity broadly stable. Timber floors move seasonally; violent swings from monsoon to air conditioning are what open joints.
- Refresh oiled floors annually and re-coat lacquered floors when the sheen dulls in traffic lanes, before the wear reaches the timber.
Mistakes worth avoiding
- Skipping the vapour barrier on a ground floor slab.
- Closing the expansion gap with a tight skirting or a fixed threshold, which turns natural movement into a bulge in the middle of the room.
- Laying before the wet trades are finished. Any floor installed before plaster and paint takes damage that shows at handover.
- Choosing a high-gloss finish for a house with dogs or small children.
The art deco glam palette does not carry an inherent price premium over the other five — what changes the estimate is wear layer thickness and the species of the top layer., which applies whichever style you choose, and pattern: herringbone and chevron add labour and wastage over a straight lay., which is more common in this palette specifically. Subfloor preparation — self-levelling compound over a poor screed is frequently the largest line item nobody budgeted.
Detailing
Finer points of this flooring
Run the plank direction along the main sightline or with the primary light source. Across it, every joint casts a shadow line.
Thresholds matter more than the floor. Where timber meets stone, a flush machined threshold reads as intentional; a surface strip reads as a repair.
Herringbone and chevron need a centre line set out before the first plank. Starting from a wall guarantees a wandering pattern.
Under-door clearance has to be checked before laying; planing doors afterwards damages an otherwise finished job.
Questions
Flooring in Art Deco Glam — answered
What happens if a plank is damaged?
Individual planks can be replaced in a glue-down floor and swapped out in a click floor by lifting from the nearest wall. Keeping a box of the original batch makes this a one-hour job instead of a full-room problem.
Does it work with underfloor heating?
Engineered and rigid-core formats do, within the manufacturer's temperature limit. Solid timber generally does not, and no floor should be laid over heating that has not been commissioned and cycled first.
How does it handle water?
Rigid-core products handle spills and mopping; timber-topped products handle spills wiped promptly. Neither should be used in a shower area or an open balcony that takes rain.
Is Flooring suitable for Indian conditions?
Yes, with the right build-up. The two things that matter are a dry, level subfloor and a vapour barrier; humidity swings and rising damp cause nearly every failure we are called to inspect.
Can it be laid over existing tiles?
Often yes, if the tiles are sound, level and clean. Loose tiles must come up first — a floating floor over a drummy tile will telegraph every hollow as a click underfoot.
Questions
Flooring questions
Which flooring is best for Indian homes?
Vitrified porcelain for most of the flat — it takes heat, water and grit, and it does not stain. Timber or laminate in bedrooms if you want warmth underfoot, and stone where you want the floor to stay cool.
Can I lay new tile over existing flooring?
Usually yes, with a bonding primer, provided the existing floor is sound and you can afford the 12–15mm of added height. Check the door clearances and any threshold to a balcony first.
Is laminate or engineered timber better?
Engineered timber has a real wood wear layer and can be sanded once or twice; laminate is cheaper, harder-wearing on the surface, and better in humidity. Neither belongs in a bathroom.
What grout width should I use?
2mm for rectified large-format porcelain, 3mm for standard tile, and 6–8mm for natural stone that varies in size. Use epoxy grout in wet areas and kitchens.
Next step
Build this flooring.
Send the floor plan and the room dimensions. We come back with this design adapted to your space and priced line by line.