LUXURY DESIGNERInteriors, authored.

Staircases and railings

Stone Staircase

A specification-first guide to Stone Staircase: what to fix before design freeze, what changes the number, and what the first year on site teaches.

Stone Staircase interior in the Modern Heritage stylePhoto: kyeniz · BY 2.0
CustomisableEvery module redrawn to your room, not picked off a shelf
Lifetime warranty*On modular cabinetry, hardware and factory finishes
Easy EMIsSplit the project across the build, interest options available
45-day deliveryFrom design sign-off to handover on standard scopes
4.5 ratingAverage handover score across completed residences

Overview

Stone Staircase, in plain specification

Written for the decision, not for the mood board.

A good stone staircase is invisible in use — everything within reach, nothing in the way, no door fouling another. Achieving that is a matter of dimensions and hardware rather than of style, which is why the specification table below matters more than the photographs.

Stone Staircase is engineered before it is styled. The layout, the services behind it, the hardware carrying it and the clearances around it all get resolved on a drawing long before a finish is picked. Done in that order, the finish becomes a free choice. Done in reverse, the finish becomes a compromise.

Where stone staircase interacts with services — a duct, a drain, a conduit, an AC route — the service wins. Every attractive detail that ignored a service has been rebuilt at some point, usually at the client’s cost, which is why we resolve them together on one drawing.

Six house styles

Stone Staircase in six personalities

The same brief resolved six ways. Each carries its own material, finish and detailing.

Stone Staircase interior in the Serene Minimal stylePhoto: seier+seier · BY 2.0
Rise and going: 165mm rise, 300mm going

Minimal Stone Staircase

Serene Minimal treats stone staircase as chalk · pale oak · linen: nothing decorative survives unless it also does work. Structure: RCC with stone cladding. Tread: 20mm stone, honed. Nosing: Shadow gap.

See this style
Stone Staircase interior in the Bold Contemporary stylePhoto: qmnonic · BY 2.0
Rise and going: 160mm rise, 320mm going

Bold Stone Staircase

Bold Contemporary treats stone staircase as charcoal · oxblood · smoked oak: high contrast, confident mass, a single saturated move per room. Structure: Steel stringer, cantilever treads. Tread: 50mm solid timber. Nosing: Square, 5mm reveal.

See this style
Stone Staircase interior in the Modern Heritage stylePhoto: kyeniz · BY 2.0
Rise and going: 170mm rise, 280mm going

Heritage Stone Staircase

Modern Heritage treats stone staircase as teak · cane · antique brass: indian craft detailing on a contemporary frame — jaali, cane, inlay and hand-finished brass, used sparingly. Structure: RCC with timber cladding. Tread: 30mm stone. Nosing: Bullnose.

See this style
Stone Staircase interior in the Classic Luxe stylePhoto: *rboed* · BY 2.0
Rise and going: 165mm rise, 300mm going

Classic Stone Staircase

Classic Luxe treats stone staircase as ivory · statuario · gold: proportioned panelling, cornice and moulding, book-matched stone and warm gilt detail on ivory. Structure: RCC with stone and moulding. Tread: 20mm stone with nosing. Nosing: Rounded with groove.

See this style
Stone Staircase interior in the Indo-Scandinavian stylePhoto: seier+seier · BY 2.0
Rise and going: 165mm rise, 300mm going

Scandi Stone Staircase

Indo-Scandinavian treats stone staircase as birch · chalk · sage: pale timber, soft daylight and muted green — nordic restraint adapted for indian light, dust and humidity. Structure: Steel with timber treads. Tread: 40mm timber. Nosing: Square.

See this style
Stone Staircase interior in the Art Deco Glam stylePhoto: jiuguangw · BY-SA 2.0
Rise and going: 160mm rise, 320mm going

Deco Stone Staircase

Art Deco Glam treats stone staircase as emerald · brass · lacquer: fluting, fans and geometry. Structure: Steel with stone treads. Tread: 20mm stone, mirror polish. Nosing: Brass inlay strip.

See this style

Specification

Stone Staircase specification, style by style

This is the table we issue to the factory and the site. It is also what a warranty is enforced against, which is why it reads in grades and dimensions.

SpecificationMinimalBoldHeritageClassicScandiDeco
Rise and going165mm rise, 300mm going160mm rise, 320mm going170mm rise, 280mm going165mm rise, 300mm going165mm rise, 300mm going160mm rise, 320mm going
StructureRCC with stone claddingSteel stringer, cantilever treadsRCC with timber claddingRCC with stone and mouldingSteel with timber treadsSteel with stone treads
Tread20mm stone, honed50mm solid timber30mm stone20mm stone with nosing40mm timber20mm stone, mirror polish
NosingShadow gapSquare, 5mm revealBullnoseRounded with grooveSquareBrass inlay strip
Balustrade10mm toughened glass12mm frameless glassTimber with metal spindlesMetal with mouldingMetal, slimGlass with brass channel
Handrail40mm SS tube50mm timberSolid teakPainted metal with brass40mm timber50mm brass
LightingStep lightsRecessed strip in stringerWall lightsChandelier over wellStep lightsProfile light under handrail
SlipR10 honedR10 brushedR10R10R10R10

Before you commit

How to choose stone staircase

Six checks that prevent the failures we are most often called to fix.

  • Rise and going are decided by the structure, not by the finish. Get them right at the RCC stage — a stair with inconsistent risers can never be fixed with cladding.
  • Check headroom at the mid-landing before anything else. Under 2.1m is a permanent daily problem.
  • Choose the tread material for grip when wet, especially where the stair is near a balcony or an entrance.
  • Confirm the balustrade infill and height against local code before design; a 900mm rail with 150mm gaps may look elegant and be unusable in a home with children.
  • Plan the lighting into the structure. Step lights and handrail profiles need conduits cast or chased before finishing.
  • For a cantilever or floating stair, get the structural design signed off. This is engineering before it is interior design.

Bangalore

Stone Staircase in Bangalore

What the city's climate, water, housing stock and society rules mean for this specification.

The Bangalore housing stock splits cleanly, and stone staircase is specified differently for each half. New towers along the outer ring have regular layouts, compact utility areas and generous ceiling height; the older independent homes in the south and west have height, thicker walls and almost no two dimensions the same.

Dust along the metro and ORR construction corridors is a real specification input. Sealed joinery, washable finishes and casement or sliding windows with good seals pay for themselves in these pockets in the first year.

Balcony enclosure rules vary sharply between societies, and a few refuse them entirely. Anything involving a balcony gets checked against the society's own rules before design, not after — including in Indiranagar and Koramangala, where older buildings often have their own restrictions.

The mild climate is a genuine advantage: solid timber and veneer move far less here than in Delhi or Chennai, which makes craft detailing more durable and more affordable than it would be elsewhere. It is one of the few Indian cities where that is true year-round.

We survey in Bangalore at no charge, take our own dimensions and come back with a layout, a material direction and a line-by-line estimate.

Sizing

Stone Staircase by home size

Sizing below is what we plan stone staircase to in each home size. These are working dimensions from completed projects, not catalogue minimums.

Home sizeTypical scopePlanning note
1 BHKCompact, single runCompact planning, one clear gesture
2 BHKStandard, two runsStandard scope, most common brief
3 BHKFull specificationFull scope with storage planned in litres
4 BHKExtended with island or dresserExtended scope, bespoke elements
4+ BHK / VillaBespoke, villa scaleVilla scale, bespoke throughout

Cost

What moves the price of stone staircase

We quote line by line rather than per square foot, because these are the items that actually differ between two estimates.

  • Structure: an RCC stair clad in stone and a steel cantilever stair are different orders of cost.
  • Tread material and edge work.
  • Balustrade type, with frameless glass and brass channels at the top.
  • Integrated lighting.
  • Engineering and site access for heavy elements.

Process

How the work runs

Five stages, with the decisions each one locks.

Survey and brief

We measure the space ourselves rather than working from the builder's drawing, note the services, water quality, daylight and society rules, and write down how the room is actually used. Stone Staircase is specified against that survey, not against a catalogue.

Design and drawings

Plans, elevations and details, with the specification written as grades and dimensions. You approve an elevation, not a render — this is the stage where changes cost nothing.

Specification freeze

Material, finish, hardware and services are locked, and the estimate becomes a line-by-line document. We tell you exactly what this date locks and what can still change afterwards.

Production and delivery

Factory production runs to the approved drawing while site work is prepared. Material is checked against the approved sample on arrival, in daylight, and stored correctly until the programme calls for it.

Installation and handover

Installation, testing, snagging and a documentation file with drawings, warranties, decor codes and hardware models. A first-year service visit is scheduled at handover.

Living with it

Maintaining stone staircase

The honest routine, and the mistakes that cost the most to undo.

Care and maintenance

  • Check glass balustrade fixings annually.
  • Re-seal stone treads on the same schedule as the floors, more often at the entrance.
  • Keep nosings clean; grit at the nosing wears the edge fastest and is the first place a stone stair looks tired.
  • Tighten handrail brackets once in the first year.

What goes wrong

  • Inconsistent riser heights, which trip people and cannot be corrected later.
  • Polished stone on an entrance stair that gets wet in the monsoon.
  • Balustrade gaps that fail child-safety spacing.
  • Deciding on a floating stair after the RCC is cast.

Detailing

Stone Staircase detailing notes

The small decisions that separate built work from assembled work.

A 5mm shadow gap between tread and riser makes a heavy stone stair look lighter, and hides the tolerance between two site-cut pieces.

Continue the handrail past the top and bottom riser by 300mm. It is a code habit and it also reads as considered.

Where treads are book-matched or vein-continuous, the slabs must be sequenced from a single block.

Light the treads, not the well. A bright pendant in a stairwell leaves the treads in shadow, which is exactly backwards.

Questions

Stone Staircase — answered

What rise and going should a home staircase use?

Around 160–170mm rise with a 280–320mm going for comfortable domestic use, kept identical on every step. Consistency matters more than the exact figure.

Can an existing staircase be re-clad?

Yes, if the structure is sound and the rise stays consistent after the new finish is added. The added thickness at the top and bottom step is the detail that has to be resolved first.

Is a glass balustrade safe?

Toughened laminated glass of the right thickness, properly fixed, is safe and is standard practice. The specification is about the fixing and the glass build-up, not the appearance.

How is a floating staircase supported?

By a concealed steel stringer or cantilever anchors cast into a structural wall. It is a structural decision taken with the engineer before any finish is chosen.

What is the best tread material?

Stone for durability and a continuous look with the floor; timber for warmth and quieter use. Both need a finish that is not slippery when wet.

How long does a staircase take?

Two to four weeks for cladding and balustrade once the structure is ready, with glass and metalwork measured after the treads are set.

Do you work on stone staircase projects across Bangalore?

Yes — Bangalore is where most of our projects are, from apartments along Sarjapur Road, Whitefield and Hebbal to independent homes in Jayanagar, Indiranagar and Malleshwaram. We survey the space ourselves, work within the society's access and working-hour rules, and hand over with a documentation file. There is a dedicated page for our work in the city if you want the full picture.

Does Bangalore's climate or water affect this choice?

The climate helps and the water does not. Mild year-round temperatures are kinder to timber and joinery than almost any other Indian city, so craft detailing lasts. Hard borewell water in the eastern and northern corridors is the real constraint — it scales glass, chrome and stone, and it changes what we specify and what maintenance we ask the family to commit to.

Next step

Planning stone staircase for your home?

Send your floor plan and we come back with a layout, a material direction and a line-by-line estimate. Free survey across Bangalore.